Fill in the blank.In order to test end-to-end connectivity, you would use the ______ command.
Ping
In order to test end-to-end connectivity, you would use the “ping” command.
The ping command is a common utility used to verify network connectivity between two devices. It works by sending a small packet of data from one device to another and then waits for a response. If the remote device receives the packet and responds, it confirms that there is an end-to-end connection and that data can be exchanged between the devices.
The syntax for using the ping command is typically:
ping [destination IP address or hostname]
For example, if you want to test the connectivity to a server with an IP address of 192.168.1.1, you would enter:
ping 192.168.1.1
The ping command will display the round-trip time (in milliseconds) it takes for the packet to travel from the source device to the destination device and back. It will also show the success rate of the packets sent and received, indicating the level of connectivity.
Ping is a useful tool for troubleshooting network issues, verifying network configurations, and testing if a device is reachable over the network.
More Answers:
Best Practices for Configuring a Hostname in Cisco CLI: Guidelines for Naming ConventionsSecure Password Storage Techniques: Preventing Unencrypted Passwords from Displaying in Plain Text
Why Mobile Devices Need IP Addresses for Internet Communication: Debunking the Myth