an administrator issues the commands:Router(config)#interface g0/1Router (config-if)# ip address dhcpwhat is the administrator trying to achieve?
The administrator is trying to configure the interface g0/1 of the router to obtain an IP address dynamically using DHCP (Dynamic Host Configuration Protocol).
By running the command “ip address dhcp” under the interface configuration mode, the router will send a DHCP request to a DHCP server on the network to obtain an IP address, subnet mask, default gateway, and possibly other network configuration parameters.
Using DHCP simplifies the IP address management process by centrally managing and assigning IP addresses within a network. Instead of manually configuring each network device with a static IP address, DHCP allows devices to automatically obtain an IP address from the DHCP server.
Once the DHCP server responds to the router’s request, the router’s interface g0/1 will be assigned a dynamic IP address, allowing it to participate in network communication.
More Answers:
The Importance of Destination MAC Address for Local Network Communication in Computer ScienceUnderstanding the Role of the Default Gateway and Destination MAC Address in Sending Frames to a Destination Device on a Remote Local Network
10 Steps to Resolve DHCP Issues and Assign an IP Address to a Host on the LAN