A technician configures a switch with these commands:SwitchA(config)# interface vlan 1SwitchA(config-if)# ip address 192.168.1.1 255.255.255.0SwitchA(config-if)# no shutdown, What is the technician configuring? A)Telnet access. B)SVI. C)Password encryption. D)Physical switchport access.
The technician is configuring a Switch Virtual Interface (SVI) with an IP address of 192.168.1.1 and a subnet mask of 255.255.255.0 on VLAN 1.
This will allow the switch to communicate with other devices on the network using Layer 3 protocols.
The “no shutdown” command is used to enable the SVI interface.
Therefore, the correct answer is B) SVI.
More Answers:
Establishing OSPF Neighbor Adjacency and Synchronizing Network Topology and Routing InformationUnderstanding OSPF Link Costs: How They Impact Routing Efficiency in Computer Networks
Understanding the Three Key Characteristics of an SVI (Switched Virtual Interface) in Computer Science
Error 403 The request cannot be completed because you have exceeded your quota. : quotaExceeded